Motorized Rectangular Dampers

Motorized Rectangular Dampers

Old fashioned reliability with NEW state of the art technology.

Model ND

nd

Heavy Duty Frame
Nylon Bushings for Quieter Operation
Revolutionary Motor with greater Reliability
LED’s to Show Damper Operation
Low Leakage
Simple 3-wire Hook-up
Easier Ordering
Motor is always mounted on second dimension specified

Model ND-RSD

nd-rsd

Heavy Duty Frame
Nylon Bushings for Quieter Operation
Revolutionary Motor with greater Reliability
Low Leakage
Simple 2-wire Hook-up
Easier Ordering
Motor is always mounted on second dimension specified

ND Series Dampers

The ND series of Ultra-Zone dampers was designed with the installer and homeowner in mind. This damper is easy to install and easy to checkout. The LED display allows the installer to visually check the damper operation. With a sturdier frame, the damper installs in the duct much faster and easier and the nylon bushings insure quieter operation. This is a feature that homeowners will never hear about! Quieter operation and a longer life motor equals NO call backs.

The motor for the ND damper is driven by 17 in. lbs. of torque, possesses a manual gear release, 3 wire power open/power closed operation and fail-safe LED’s for quick diagnostic checks. The motor is UL listed and NEMA Class 2 certified. The easy access, quick connecting terminal block eliminates the need for wire nuts and allows for trouble free use.

The ND damper has a 97% leak proof rating. Overlapping blades and a strong positive off motor insures accurate control of all zones. The ND dampers combined with the Ultra-Zone zoning system provides the most comfortable and reliable system in the industry.

The ND is available in 8″ x 6″ thru 30″ x 30″ in even inch increments. The motor will be mounted on the second dimension when ordered. For example, a 16″ x 8″ damper will have the motor mounted on the 8″ dimension, while an 8″ x 16″ will have the motor mounted on the 16″ dimension. This will alleviate the confusion between side mount and bottom mount dampers.

For added flexibility, ND dampers can also be provided with a spring return style motor , Model ND-RSD. The ND-RSD does not have LEDs. Please specify the unpowered state of ND-RSD dampers as “normally closed” or “normally open” when ordering.

Notice: The MA-ND5 (power open/power close) motor actuator cannot be used to replace an existing MA-RSD (spring return) motor actuator, nor can an MA-RSD replace an MA-ND5.

Options

ND-L: 3/8″ hex shaft – no motor
ND-MQ: Manual Quadrant – no motor
ND-LM24: 35 in/lbs 24 volt motor
ND-LM24SR-T: Modulating Motor
ND-MA15S: 15 Second Motor
S1A: End Switch
ND-LF24: 24V Spring Return
ND-LF120: 120V Spring Return

Duct Board Adapters

dba

These brackets are used to mount ND and ND-RSD style dampers to fiberglass duct boards. The brackets are 1″ thick. Add the number “5” to the part number for 1.5″ thick duct board (EX: DBA-10-5). Sizes range from 6″ – 24″ in 2″ increments.

Have a question or need to place an order?