:I CHANGED TO A DIFFERENT MANUAL STAT AND IT NOW WORKS FOR BOTH A/C AND HEAT.URD-8" NO COOLING
URD-8" NO COOLING
i AM TROUBLE SHOOTING A URD 8" AND USING THE WIRING DIAGRAM THAT CAME WITH THE DAMPER. THE HEATING WORKS CORRECTLY EVERY TIME, BUT I CAN'T GET THE COOLING TO MOVE THE DAMPER WHEN THE MANUAL THERMOSTAT IS SWITCHED TO COOLING, EVEN AFTER THE WAITING PERIOD OF 5 MINUTES. IS THERE A FIX TO THIS ISSUE? :I CHANGED TO A DIFFERENT MANUAL STAT AND IT NOW WORKS FOR BOTH A/C AND HEAT.
:I CHANGED TO A DIFFERENT MANUAL STAT AND IT NOW WORKS FOR BOTH A/C AND HEAT.-
Pcyrana
Re: URD-8" NO COOLING
Do you have a jumper on the thermostat between W and Y?
Is the thermostat that this setup works properly with the same thermostat as the previous?
If not what are the differences? What are the model numbers?
Is the thermostat that this setup works properly with the same thermostat as the previous?
If not what are the differences? What are the model numbers?