NCM-300 - airflow issue

Post your questions and comments here.
Post Reply
mmihir82
Posts: 1
Joined: Tue Jan 11, 2022 12:23 pm

NCM-300 - airflow issue

Post by mmihir82 »

Hello All, Thanks for viewing my request.
We have NCM-300 model installed at our house. We have upstairs and downstairs w/ two nest control thermostats. Have turning on the downstairs thermostats for the heat, only air coming out from the upstairs vent, but nothing downstairs vent. This all happened, when the power breaker tripped.

I restarted the power from the unit by pulling the cable, but noticed, first light kept blinking. Please see the attached pic
(see the attached pic) >> I have turned on the Downstairs thermostats, but looks like it is opening Zone2 which is upstairs.

Please give me some advice. Thank you
You do not have the required permissions to view the files attached to this post.
Steven W.
Posts: 46
Joined: Tue Jun 25, 2019 9:13 am

Re: NCM-300 - airflow issue

Post by Steven W. »

I did not get any pictures? I also need more info. Can you email me the pics.
www.sweisneck@ewccontrols.com
Steven R. Weisneck
Technical Engineer
Tel: (732) 446-3110 Ext. #461
www.ewccontrols.com
sweisneck@ewccontrols.com
Post Reply