BMPlus3000?
BMPlus3000?
Will the BMplus 3000 (old style) work with a Honeywell IAQ thermostat on zone 1? I guess that's my first question. Second, if it will work can I keep it in heat pump mode? Equipment is a 3.5 ton Comfortmaker heatpump w/elec. backup heat. Looks like the new style will work but I'm not sure about what I have.
Re: BMPlus3000?
Hello,
The original BMPlus3000 (Version 1.5) will work with the IAQ thermostat, but it must be configured for Non-Heatpump mode. The BMPlus3000 Rev. B (Version 2.6 or higher) will work with the IAQ thermostat programmed for heatpump operation.
Eric
The original BMPlus3000 (Version 1.5) will work with the IAQ thermostat, but it must be configured for Non-Heatpump mode. The BMPlus3000 Rev. B (Version 2.6 or higher) will work with the IAQ thermostat programmed for heatpump operation.
Eric
Re: BMPlus3000?
Thanks Eric.
i talked to John on the phone and he was very helpful in explaining differences in the versions. This is going to be a fun project.
Thanks again.
i talked to John on the phone and he was very helpful in explaining differences in the versions. This is going to be a fun project.
Thanks again.