Hello,
I have a recently installed Daikin Fit system with the UT3000 and 3 zones. All zones are using Daikin One+ thermostats.
Everything is working well except that the fan speed during purge is annoyingly high.
The purge setting has been changed from 50% to 25%, but seemed to have minimal, if any, impact.
I see the UT3000 manual have several notes about purge speed, but to this point neither my installer or myself have been able to find a setting that notably reduces the purge fan speed.
My unscientific observation is that the fan speed seems to roughly equal the max fan speed I've experienced in high load situations, meaning it is far higher than I experience during normal runs.
Any assistance is appreciated.
Daikin Fit - high fan speed during purge
Re: Daikin Fit - high fan speed during purge
Please give us a call on this when you get a chance.
Thank you
732-446-3110
Thank you
732-446-3110
Steven R. Weisneck
Technical Engineer
Tel: (732) 446-3110 Ext. #461
www.ewccontrols.com
sweisneck@ewccontrols.com
Technical Engineer
Tel: (732) 446-3110 Ext. #461
www.ewccontrols.com
sweisneck@ewccontrols.com
Re: Daikin Fit - high fan speed during purge
I have the exact same system and also have the annoying Purge noise. Mine is also set at 25%, but seems like it's on full blast. Not sure how to solve this.
-
- Posts: 2
- Joined: Thu Feb 10, 2022 9:01 am
Re: Daikin Fit - high fan speed during purge
Please provide any details and the resolution. Thank you.
-
- Posts: 5
- Joined: Fri Nov 17, 2023 12:41 pm
Re: Daikin Fit - high fan speed during purge
I'm in the same boat. Any resolution?
-
- Posts: 5
- Joined: Fri Nov 17, 2023 12:41 pm
-
- Posts: 5
- Joined: Fri Nov 17, 2023 12:41 pm
Re: Daikin Fit - high fan speed during purge
Stuck with the fixed purge time?
Re: Daikin Fit - high fan speed during purge
Does it happen every 210 seconds as per manual?
-
- Posts: 5
- Joined: Fri Nov 17, 2023 12:41 pm
Re: Daikin Fit - high fan speed during purge
From my understanding the UT3000 will hold the last calling zone open for 210 sec to purge.
I believe the Daikin fit handles its own purge at the end of any cooling or heating operations at a reasonable fan speed. Once that finishes the UT3000 kicks in further purging the system at what seems to be 100% fan speed for the 210 seconds.
I'm a little disappointed why this 210 sec fixed purge isn't something that can be adjusted or disabled. I have adjusted the purge fan speed to 25% but it still seems to ramp the fans to 100%
HVAC equipment attic
Z1 Master bedroom (third floor) 5%
Z2 Living room/kitchen (second floor) 80%
Z3 Guest bedroom/laundry (first floor) 15%
The master bedroom is its own zone. In the middle of the night when the master bedroom calls for air, the Daikin system runs and cools fine but when the 210 sec purge happens it ramps the fans to 100% which is so loud it can sometimes wake you up.
None of the different Daikin air profiles match the purge cycle fan speed so its always jarring in the middle of the night when the purge happens.
I believe the Daikin fit handles its own purge at the end of any cooling or heating operations at a reasonable fan speed. Once that finishes the UT3000 kicks in further purging the system at what seems to be 100% fan speed for the 210 seconds.
I'm a little disappointed why this 210 sec fixed purge isn't something that can be adjusted or disabled. I have adjusted the purge fan speed to 25% but it still seems to ramp the fans to 100%
HVAC equipment attic
Z1 Master bedroom (third floor) 5%
Z2 Living room/kitchen (second floor) 80%
Z3 Guest bedroom/laundry (first floor) 15%
The master bedroom is its own zone. In the middle of the night when the master bedroom calls for air, the Daikin system runs and cools fine but when the 210 sec purge happens it ramps the fans to 100% which is so loud it can sometimes wake you up.
None of the different Daikin air profiles match the purge cycle fan speed so its always jarring in the middle of the night when the purge happens.