is it possible to update the software on a UT3000?

[1stbscout]

I have a UT3000 ver.1.19 board on my Amana invertor system. I have been working on "ways" to get a communicating system smart thermostat to work with said system. I connected a Daikin One+ thermostat to the zone controller and could not get it to communicate with the board. But if I connected it directly to the equipment bypassing the board it did find and communicate with the equipment.
Is this due to a change in the software for the later UT300 boards?

[Steven W.]

Give us a call when you get a chance

[Juliet89]

Yes, it is possible to update the software on a UT3000. Typically, you would need to download the latest firmware from the manufacturer's website and follow the specific update instructions provided. Ensure you have a stable power source and follow all steps carefully to avoid any issues during the update process. Always back up your current settings before proceeding...

[Steven W.]

You can update the software. But we have to do it in house for you we do not have anything online to update your zone board.
Send me your email (off this forum) and I will give you all the INFO. (tech@ewccontrols.com)

Thanks
Steven