Best option for remote control of all zones -- four UT3000's

[tnedator]

Hi,

I'm not sure if this is really an EWC question, but figure you might have some experience you can share.

My setup will be four HVAC/Furnaces, with four UT3000 boards. Each will have either two or three zones on it, so about 10 thermostats.

This is Amana/Goodman equipment, and I will be using the CTK04 communicating thermostats.

Are my only two choices for controlling all the thermostats from a single place:

1. A single Honeywell Personal Comfort remote control.
2. Honeywell Total Comfort Connect website/app running through a redlink gateway?

I will have a Redlink gateway (hoping I can hook all four zone boards/10 thermostats to it).

Ideally, I would like to be able to control it from an automation system like Crestron, but I don't want to give up the benefits of the communicating thermostats.

[Paul Z.]

You will not be able to use the Honeywell equipment thermostats. You can use wireless conventional stats. You should have one thermostat hard wired to the board, your CTK04.