BMPlus3000?

Post your questions and comments here.
Post Reply
ckr74
Posts: 2
Joined: Tue Sep 01, 2009 6:24 pm

BMPlus3000?

Post by ckr74 »

Will the BMplus 3000 (old style) work with a Honeywell IAQ thermostat on zone 1? I guess that's my first question. Second, if it will work can I keep it in heat pump mode? Equipment is a 3.5 ton Comfortmaker heatpump w/elec. backup heat. Looks like the new style will work but I'm not sure about what I have.
Eric K.

Re: BMPlus3000?

Post by Eric K. »

Hello,

The original BMPlus3000 (Version 1.5) will work with the IAQ thermostat, but it must be configured for Non-Heatpump mode. The BMPlus3000 Rev. B (Version 2.6 or higher) will work with the IAQ thermostat programmed for heatpump operation.

Eric
ckr74
Posts: 2
Joined: Tue Sep 01, 2009 6:24 pm

Re: BMPlus3000?

Post by ckr74 »

Thanks Eric.
i talked to John on the phone and he was very helpful in explaining differences in the versions. This is going to be a fun project.
Thanks again.
Post Reply