Post your questions and comments here.
2 posts • Page 1 of 1
- Posts: 1
- Joined: Sun Mar 10, 2019 3:33 pm
I have a two stage natural gas forced air furnace with a 2-zone system controlled by a EWC BMPplus Rev B controller. When the system was first installed I had a lot of noise in the ducts during activation and running of the zones, mostly with zone 2 (basement). The contractor installed a bypass damper to help with noise, but after reading about their inefficiency I decided to just let extra air dump from zone 2 to zone 1 by making the closed position of the zone 1 dampers be at 80%. I now force the bypass damper closed all the time. This solved most of the noise issue. I still have a lot of noise when the zone 2 (basement) damper closes and opens (mostly when closing). It seems like I could solve it by making the blower stop before the damper closes. Is this possible? I noticed there is a purge delay timer, but the time is fixed at 90 seconds.