BMPlus3000 works intermittently

Post your questions and comments here.
Post Reply
Doldrums
Posts: 2
Joined: Mon Feb 05, 2018 11:49 am

BMPlus3000 works intermittently

Post by Doldrums »

Specs:
  • BMPlus3000 rev B
  • Conventional / Gas / Single Stage
  • Using Zone 1 with 2 dampers. Zone 2 with 1 damper.
  • 2 Stats - Both Sensi units. Configured for Gas 1 Stage as well.
Problem:
This unit works perfectly 90% of the time. Other times, the HVAC will not click on for heat.
The LEDs show properly (LED 6 - Zone 1 & LED 7 -Zone 2 are both lit; as well as LED 10 - W1 being lit).

It will sit in this state for hours until I either: a) hit the reset button (which works sometime) or b) kill the whole units power and then turn back on.

If needed, I can chart the run-times for you (in case you think I'm hitting some sort of timer limits).

Any help is GREATLY appreciated!

Thanks,

Hugh (Doldrums)
You do not have the required permissions to view the files attached to this post.
Paul Z.
Posts: 216
Joined: Thu Dec 08, 2011 3:05 pm

Re: BMPlus3000 works intermittently

Post by Paul Z. »

Call 18004463110X490 have question.
Doldrums
Posts: 2
Joined: Mon Feb 05, 2018 11:49 am

Re: BMPlus3000 works intermittently

Post by Doldrums »

SOLVED: I have determined the board is working properly, as I used a meter to test System outputs. The furnace board is being flaky.
Post Reply