Upgrading from EWC-ST-2E to NCM300

Post your questions and comments here.
Post Reply
moonshot1992
Posts: 1
Joined: Fri May 20, 2016 11:07 pm

Upgrading from EWC-ST-2E to NCM300

Post by moonshot1992 »

Hello -

I will be swapping out my older ST-2E panel with the NCM300. On the ST-2E I use the following System Connections Y, W, G, R. (see attachment)
IMG_20160520_230520.jpg
. The NCM300 has W2/E, W1/B, O, Y, G, RH, RC, C.

How do I connect Y, W, G, R to NCM300?

thank you
You do not have the required permissions to view the files attached to this post.
John B.
Posts: 30
Joined: Fri Mar 13, 2009 8:57 am

Re: Upgrading from EWC-ST-2E to NCM300

Post by John B. »

Sorry for the late response.

The Y and G connections are obviously the same. Your existing W wire will connect to the W1/B terminal on the NCM300. Your existing R wire will connect to the Rc terminal on the NCM300. (Rc & Rh are connected internally).

Let us know how it goes.

John
John Brown :geek:
Post Reply