Upgrade ST-3E to BMPlus 5000

Post your questions and comments here.
Post Reply
Ejolivares
Posts: 1
Joined: Thu Oct 08, 2015 11:29 pm

Upgrade ST-3E to BMPlus 5000

Post by Ejolivares »

Hello -

I am homeowner.

I have a 3 zone setup in my home. I have single stage gas furnace and A/C. I will be finishing the basement and need a 4th zone. I am planning on replacing the ST-3E with a BMPlus 5000. I am also replacing my thermostats (one at a time) with ecobees.

I do not have a heat pump. I have attached a picture of my current panel.

Can you confirm the connections to the system currently connected to the ST-3E would go to the following BMPlus:

G >> G
Y >> Y1
W >> W1
R >> RH

For the DIP switches, what do I do

System: GAS
HP: ? Does it matter if there is no Heat Pump? Or what do I set to?
Fan Delay: OFF
Purge: Suggestion?
2nd stage: I have a single stage, what do I do with this one?
50% rule: I have a single stage, what do I do with this one?
SAS: Suggestion?
Fan: GAS

Any concerns with installing an Ecobee in Zone 1 and leaving my old Robershaw thermostats on Zone 2 and Zone 3? In the current setup Zone 2 and 3 are slaves. It does not seem that will be the case with the BMPlus.

Thank you for your help.
You do not have the required permissions to view the files attached to this post.
Paul Z.
Posts: 216
Joined: Thu Dec 08, 2011 3:05 pm

Re: Upgrade ST-3E to BMPlus 5000

Post by Paul Z. »

I have a few questions about you system? Please give me a call 1-800-446-3110 X490.
Post Reply