Damper not operating properly.

Post your questions and comments here.
Post Reply
bandresen
Posts: 1
Joined: Fri Jan 28, 2011 11:37 am

Damper not operating properly.

Post by bandresen »

Story: We recently purchased our home. This house has three zones/three dampers. One damper is not opening/closing. I can manually open/close the damper. The home is 10 years old. There are no model numbers anywhere (stickers are missing). I removed the blue plastic cover on the front of the motor (actuator). The actuator looks exactly like the MAN pictured on your website, and has your EWC Controls Inc. information on the front. There is a red wire going to 1, a white wire to 4 and a green wire to 6. Additionally a red wire is connecting 2 and 5. Can I replace my actuator with the MAN?
Eric K.

Re: Damper not operating properly.

Post by Eric K. »

The motor you are describing is the Model MAN.

Eric
Post Reply