Ncm300

Post your questions and comments here.
Post Reply
waterdawg68
Posts: 1
Joined: Wed Jul 08, 2015 12:48 pm

Ncm300

Post by waterdawg68 »

I apologize if this is a repeat question...
with all 3 of my thermostats removed from their bases and even having their input terminations on the ncm300 pcb disconnected, i am getting around 24v outputs on zones 1 and 2 damper.....?? The same thing happens when all three thermostats are connected and with wiring terminated. It seems to me this would be a ncm300 pcb failure but, im only a diy'r. Can you please help?
thanks,
waterdawg68
Paul Z.
Posts: 216
Joined: Thu Dec 08, 2011 3:05 pm

Re: Ncm300

Post by Paul Z. »

When the board is idle there will be power on terminals 1-2 all the time and terminal 1-4 when board is idle. Call the office and will go into more detail.
Post Reply