EWC Controls Forum

You are correct both thermostats will be connected to r, y and w the mcs-dxb will be wired to r1, o, b and g.

I have discussed this issue with our Chief Engineer John Brown and we are having some difficultly deciphering what you are trying to achieve. Please contact Mr. Brown at 800-446-3110 extension 462 to discuss in further detail. Erik Wnoroski EWC Controls, Inc. 385 State Route 33 Englishtown, NJ 07726 ...

The Crestron thermostat is compatible with the variable speed modulating furnace because the UT 3000 is operating the blower not the thermostat. As for what features you will not get with the 24 volt thermostat it is you will not have access from that thermostat to the advanced comfort net menu, but ...

We here at ewc controls can accommodate you on what you are trying to do. First off do your thermostats you have have a separate dehumidification terminal? If so you can you can use that terminal to energize you dehumidification terminal on the unit, this will only be able to be done if the unit and ...

I am not following exactly what you are trying to do, can you please explain in more detail what you are trying to accomplish?

Erik Wnoroski
EWC Controls, Inc.
385 State Route 33
Englishtown, NJ 07726
800-446-3110 ext 483

No special wiring, there is a diagram provided in the technical bulletin you will receive upon purchasing the panel.

Sir, With the amount of questions you have pertaining to your system it is to much to cover in the forum and would be best handled over the phone. Please contact John Brown our chief engineer here at EWC Controls Inc. and he will assist you with all your questions. You can reach him at 800-446-3110 ...

1. If you set your dampers for leakage and create some open runs you can set up your system so it will not need a bypass damper. 2. If you use 24 volt stats the same thing applies as with communicating stats, you have to set your zone dampers for leakage and have some open runs to be able to ...

You can use either a bmplus 3000 or a ncm 300. Use the bmplus for two stage operation and the ncm 300 if you have single stage.

Erik Wnoroski
EWC Controls, Inc.
385 State Route 33
Englishtown, NJ 07726
800-446-3110 ext 483

Mr. T.
Thank you for the explanation that is the exact same answer I would have given.