Upgrade from ST-2D to NCM-300

Post your questions and comments here.
Post Reply
zombyw00f
Posts: 1
Joined: Fri Apr 10, 2015 2:39 pm

Upgrade from ST-2D to NCM-300

Post by zombyw00f »

I want to upgrade my old control panel (EWC ST-2D) to a modern unit (EWC NCM300) with modern thermostats (Honeywell RTH9580WF). The 24V, Zone2, and Zone1 motor wiring seems straightforward, but the system wiring does not seem as easy. I currently have only a Y, W, G, and R wire connected to the control panel, and I am not sure how to correctly wire this to my new panel. Can you please confirm how to properly wire this panel to my system?
Paul Z.
Posts: 216
Joined: Thu Dec 08, 2011 3:05 pm

Re: Upgrade from ST-2D to NCM-300

Post by Paul Z. »

your system wiring is the same, the difference is NCM has a W1/B, W2/E. You will be using only RC/RH (which is linked together) Y, W, G. You might not have enough wires in zone 2/3. You will not be using the "G" (which will not give you independent fan).
Post Reply